Fuchs Renolin PG 220 High Quality Industrial Gear Oil
Add To Basket
- Technical Info
- Shipping Explained
Fuchs Renolin PG 220 High Quality Industrial Gear Oil
Lead Time Warning:
Please note that some industrial and commercial products are made to order and therefore have an extended lead time. For exact delivery timescales get in touch with the Opie Oils team.
The RENOLIN PG oils are fully synthetic industrial gear oils based on special, newly developed polyglycol base oils.
Thus the RENOLIN PG products offer a very high oxidation and temperature stability. Polyglycols have a very good viscosity-temperature behaviour (high natural, shear-stable VI) and can therefore be used within a wide temperature range (depending on the viscosity grade and the working conditions from -35C up to 160C). Special additives adapted to these polyglycols further improve the good properties of the base oils - high wear protection, excellent corrosion protection also at the presence of condensation water, low foaming, and very good compatibility with non-ferrous metals.
The excellent anti-wear properties could be proven in different tests with RENOLIN PG. The load stage >14 was passed in the standard FZG test (FZG A/8,3/90), and the load stage >12 was passed in the FZG test A/16,6/140 (high speed, high temperature FZG test). RENOLIN PG has a high micropitting resistance - load stage “high” - and a good pitting resistance. RENOLIN PG was tested in a special “low speed” FZG test (according to DGMK (Deutsche Wissenschaftliche Gesellschaft fur Erdöl, Erdgas und Kohle e.V.) - FZG scuffing test) which RENOLIN PG passed with excellent results (wear category: “low” = excellent). This special test shows the excellent wear protection of RENOLIN PG at two different temperatures (90C and 120C) under mixed and boundary lubrication conditions. The lubricating film remains stable even at high pressures and under mixed friction conditions. Thus the friction coefficient is low, and a temperature reduction by up to 20C can be achieved compared with mineral oil-based lubricants.
Efficiency tests in a worm gear test rig demonstrated the high performance and the low friction coefficient which is especially of great importance for the use in worm gears. The results of RENOLIN PG in the FE8 roller bearing wear test were excellent. Tests in a special test rig at the University of Munich (FZG Institute - Forschungsstelle fur Zahnräder und Getriebebau) led to excellent results regarding antiwear behaviour and efficiency.
The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200C are temporarily tolerable.
RENOLIN PG is not miscible or compatible with mineral oils, ester oils and polyalphaolefins. When changing between polyglycols from different manufacturers, the compatibility has to be checked. Before changing-over, it is recommended to clean the system and to flush with RENOLIN PG. The compatibility with elastomers, varnishes and coatings should also be checked before changing from mineral oil to polyglycols. The specifications of the roller
bearing and gear manufacturers have to be observed.
Is this the right product?
Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.Industrial Help / Recommendation Form
- Excellent wear protection
- High scuffing load carrying capacity
- Very high resistance to micropitting
- Excellent roller bearing wear protection (FE8)
- Increase of efficiency, reduction of temperature - low friction coefficient
- Excellent viscosity-temperature behaviour (high VI)
- For use at high and low operating temperatures
- High ageing stability
- Good corrosion protection
- Excellent air release
- Low foaming
Specifications:The RENOLIN PG products fulfil and exceed the minimum requirements according to:
- DIN 51 517-3 (2004): CLP-PG
- ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / (CKS) / CKT
- AGMA 9005/E02: EP
- A. Flender
- Alpha Getriebebau
Technical Information:Oil drain / change over procedure >>>
|ISO VG||220||DIN 51 519|
|DIN EN ISO 3104|
|Viscosity index||-||218||DIN ISO 2909|
|Density at 15ºC||kg/m3||1075||DIN 51 757|
|Colour||ASTM||0.5||DIN ISO 2049|
Cleveland open cup
|DIN ISO 2592|
|Porpoint||ºC||-36||DIN ISO 3016|
|Neutralisation number||mgKOH/g||0.6||DIN51 558-1|
|Copper corrosion||Degree of corrosion||1-100 A 24||DIN EN ISO 2160|
|Steel corrosion||Degree of corrosion||0-A||DIN ISO 7120|
|Mechanical testing in the|
FZG gear test rig
FZG A/8, 3/90
FZG A/16, 6/140
Failure load stage
SHIPPING IS FREE* for orders of £60 and over
, regardless of the weight of your order.
We've tried to keep all other shipping costs as low as we can.
Carriage starts at just £0.95 (inc VAT) for small items, with our most common courier rate set at £4.99 for orders of 5kg (enough for 5 litres of oil).
- *Free shipping is available for UK Royal Mail, UPS Access Point™ (click & collect) and standard UK courier services (not express / priority / islands).
- Courier surcharges mean we are unable to offer free "to the door" courier shipping from us in Cornwall up to Highlands / Grampian in Scotland - and because we send a lot of liquids, not every courier option is available to us. UPS Access Point™ (click & collect) is available as a free shipping option across Scotland, Wales and England, wherever there is a UPS Access Point™ Location.
- Carriage charges are based on weight - please see our table of carriage costs for full details (although adding an item to your cart and viewing the calculated carriage is often easier!).
- Priority shipping is also available.
How long will it take to get my order?
We give an estimate of delivery dates as you shop and in your basket. The vast majority of items are held in stock and dispatched from our UK warehouse and we'll do all we can to get your order to you as quickly as possible.
Free Shipping Over £60!
UK mainland, standard shipping*
No Leak Guarantee
We replace any shipping damages
We never like to be beaten on price