FLASH SALE 15% OFF VOUCHER:
Free Uk Delivery
On Orders above £60
60 Day Returns
Free Expert Advice
No Leak Guarantee
01209 202944
Castrol Bike
Close
Fuchs Renogear PG 320 High Quality Industrial Gear Oil
Loading...

Fuchs Renogear PG 320 High Quality Industrial Gear Oil

Fuchs Renogear PG 320 gear oil - 20L (Drum)

20L (Drum)

£249.95

Checking Stock

or

2
4
6

Add To Basket

  • Description
  • Benefits
  • Specifications
  • Technical Info
  • Shipping Explained

Description:
Fuchs Renogear PG 320 High Quality Industrial Gear Oil

Lead Time Warning:

Please note that some industrial and commercial products are made to order and therefore have an extended lead time. For exact delivery timescales get in touch with the Opie Oils team.

A range of polyalkylene synthetic gear oils

The RENOGEAR PG RANGE of industrial gear oils are synthetic products formulated with a polyalkylene glycol base and offer excellent corrosion protection. Outstanding load carrying capacity, thermal stability and demulsification are also provided by the products in the range.

Application:
The RENOGEAR PG RANGE can be used successfully to lubricate items such as calenders, bevel, spiral bevel, helical, spur and worm reduction gearboxes.
Use as a ‘Sealed for life’ grade is possible in certain applications.
RENOGEAR PG oils are not compatible with mineral oils, esters and polyalphaolefins. Do not mix RENOGEAR PG products with this type of fluids. Also when changing from other polyglycol products to RENOGEAR PG, and when mixing different viscosity grades, please check the compatibility.

NOTE: FLUSHING PROCEDURE:
RENOGEAR PG RANGE products are NOT miscible with mineral oil or other glycol based lubricants. When changing from other products the unit should be run to warm the existing fluid, then drained and cleaned of any sludges. Flush with a minimum volume of.
RENOGEAR PG under no load until fluid is warm, then drain, repeat if necessary. Check condition and type of seals and replace if necessary. Fill the gear unit with appropriate RENOGEAR PG fluid and inspect after one or two days to ensure that the lubricant is free from contaminants since contamination with other lubricants can lead to sludge formation, foaming and other general performance reducing problems.

NOTE: MATERIAL COMPATIBILITY:
Seal types of NBR (nitrile rubber), fluoro-silicone or vinyl-methyl polysiloxane (Q) are recommended especially in high temperature applications.
RENOGEAR PG lubricants should not be used with polyurethane based elastomers, leather, cork, asbestos, paper or board.
Ordinary paints will soften in the presence of RENOGEAR PG oils and as such internal surfaces of gear units should not be painted. If painted then a two-pack epoxy type product should be used.

Is this the right product?

Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.

If you are unsure if this product is right for your needs or have any other questions please feel free to get in touch or use our Recommendation form.

Industrial Help / Recommendation Form

PDF Downloads:

Download the Technical PDF

Benefits:

  • The RENOGEAR PG RANGE of gear lubricants are eminently suitable for applications up to 200ºC
  • The thermal stability of the products when used in industrial enclosed gear units offers life exceeding 10,000 hours at 100ºC

Specifications:

  • Meets the requirements of David Brown Type G lubricant.

Technical Information:

RENOGEAR
PG 320
CharacteristicsUnit
Test Method
Appearance
Clear fluid

Colour
2 Gardner

Specific gravity at 15.6ºC
1.009
IP160
Kinematic viscosity
at 40ºC
at 100ºC

mm2/s
mm2/s

325
44.8
IP71
Viscosity index

196
IP226
Flash point (PMCC)ºC225
IP34
Pour point
ºC-30
IP15
Neutralisation number
mg KOH/g
1.12
IP139
Air release at 90ºCmin27ASTM 3427
Oxidation characteristics Total
oxidation products (TOP)
with soluble metal catalyst


%wt


0.523

IP280
(BS 2000 part 280)
FZG
load stage
>13IP334
Timken OK load

Shipping

SHIPPING IS FREE* for orders of £60 and over , regardless of the weight of your order.
We've tried to keep all other shipping costs as low as we can.

Carriage starts at just £0.95 (inc VAT) for small items, with our most common courier rate set at £4.99 for orders of 5kg (enough for 5 litres of oil).

  • *Free shipping is available for UK Royal Mail, UPS Access Point™ (click & collect) and standard UK courier services (not express / priority / islands).
  • Courier surcharges mean we are unable to offer free "to the door" courier shipping from us in Cornwall up to Highlands / Grampian in Scotland - and because we send a lot of liquids, not every courier option is available to us. UPS Access Point™ (click & collect) is available as a free shipping option across Scotland, Wales and England, wherever there is a UPS Access Point™ Location.
  • Carriage charges are based on weight - please see our table of carriage costs for full details (although adding an item to your cart and viewing the calculated carriage is often easier!).
  • Priority shipping is also available.

How long will it take to get my order?

We give an estimate of delivery dates as you shop and in your basket. The vast majority of items are held in stock and dispatched from our UK warehouse and we'll do all we can to get your order to you as quickly as possible.

Share this product: